Wicked Decals IMSA GTP

1/24 Wicked Model Cars decal set

Description

This is a 1/24 scale decal set, intended for the Wicked IMSA GTP kit.

With these decals, the works cars can be made in the 1989 season. 

   Here are a few tips on how to use them to get the best result.

• - Cut the decals using a sharp knife.
• - Place the decals in lukewarm water for only 1 or 2 seconds, to prevent them from curling up.
• - Leave them on a dry surface for about 10 – 20 seconds.
• - Carefully apply them on the models by sliding them off the decal paper.
• - Be aware that while doing this, some decals might curl up.
• - Use soft paper cloth to remove excess water and air bubbles.
• - When using softener, always test it first on a piece of left over decal.
• - Before clear coating the model, test your clear coat first on a piece of left over decal.
• - The decals have been placed as logically as possible on the sheet.
• - Should you have trouble finding where a certain decal is to be applied, Google is your friend!
• - Most important!!! Take your time and have fun!

It is inspired but not identical to the 1/1 car in the picture.